Brand Model Lilliput FA1014 / S ratio of 16:10 screen resolution 1280 * 800 average brightness 350 (cd / m2) Contrast Ratio 800: 1 Panel Type IPS Interface Type HDMI port, S-VIDEO, VGA, 3G-SDI Power 10 ( W) Dimensions 10.1 (inches) FA1014 network publicity 1 23 ips FA1014 2 FA1014 network publicity network publicity network publicity 3 FA1014 4 FA1014 network publicity 5 Important safety instructions: l Please read before using this product guide. l Please save for future reference. l Please read the precautions to prevent danger and property damage that may occur. Product description: High resolution: 1280 × 800 wide input voltage: DC 7-24V; High Contrast:??? 800: 1; 170 ° / 170 ° (H / V) wide viewing angle design provides users with a better? picture effect. ? Automatic backlight adjustment (optional feature) Note: 1. Please do not place the monitor screen towards the ground. 2. Avoid strong impact or been dropped. 3. Do not scrub machine with chemicals or solvents. Use a soft cloth to remove dust and dirt on the machine, in order to ensure the unit's bright. 4. Do not block any ventilation openings. 5. Troubleshooting Guide adjust this product, any improper operation may result in damage to the product in accordance with the instructions and troubleshooting. Any further adjustments need to be done by a certified technician to operate, or operate under the guidance of a certified technician. 6. If the long-term use of the machine, or lightning, unplug the power cord. Troubleshooting 1. Check the color is only black and white display is set correctly 2. Turn on the power, but the connection is not an image checking AV1, AV2, PC, HDMI, SDI or DVI is correctly connected. Use of this product is equipped with a standard transformer, improper power input can cause damage to the equipment. 3. Check the wrong color or offset all cables are properly and securely connected. Broken or loose cable connection pins will cause poor contact. The image shows the size of the error in the boot receiving HDMI (high sharpness Multimedia Interface) signal Press FN automatically zoom in / zoom out. 5. Other issues press "M / EXIT" key, select System → Reset → On 6. In VGA mode image position shift in VGA mode, press the FN key to automatically capture images.